Instrument manufacturer： Anton Paar

Asset number： 22002402

Asset manager： ----

Purchase date： 2022-03-11

Instrument price： 179.60 Ten thousand yuan

Origin of instruments： Austria

Instrument supplier： ----

Purchase manager： ----

Main accessories： System Components: 1 Open granite gantry test frame 2 Fully automatic three-axis integrated translation stage 3 Super nanomechanical testing system controller 4 System control and analysis test software 5 Hz Stress Modeling Software 6 Ultra Nano Indentation Test Module 7 Metallurgical optical microscope module (supports automatic zoom) 8 5x, 20x, 50x, 100x objective lenses each 9 Acoustic enclosure and active vibration damping platform 10 High temperature 200℃ test module 11 Standard indenters, calibration, calibration standards and tools

Main parameter： Technical indicators (* is the key indicator) 1 System platform technical indicators 1.1 *Open granite gantry test frame, can mount 3 modules at the same time, easy to upgrade 1.2 Support sample horizontal placement, vertical loading test 1.3 * Fully automatic three-axis integrated stage travel: ≥215mm×75mm×30mm 1.4 Visual positioning accuracy of fully automatic three-axis integrated stage: ≤ 1um 2 Nanoindentation Specifications: 2.1 * Indentation loading mode: dual piezoelectric ceramic drive 2.2 Displacement measurement: 3 sets of capacitive displacement sensors, differential measurement method 2.3 *Maximum load [mN] 100 2.4 Load resolution [nN] ≤3 2.5 Load noise floor [rms] [μN] ≤0.05 2.6 Depth range [μm] ≥50 2.7 Depth resolution [nm] ≤0.003 2.8 Depth noise floor [rms] [nm] ≤0.03 2.9 Nanoindentation frame stiffness [N/m] ≥108 2.10 *Temperature range [℃] ambient temperature - 200 2.11 Heating area of ​​high temperature nano-intrusion module: ≥25 x 50 mm 2.12 * Active surface reference system, realizes differential measurement of sample surface and indenter depth, actively eliminates thermal drift error in real time, and can test after power on, no need for thermal stabilization 2.13 Anti-collision indenter system to prevent the indenter tip from colliding with the sample surface 2.14 Automatic hardness and elastic modulus calculation, support for indentation work determination, including Wel, Wplast, Wtot 2.15 Support load/displacement control mode, support constant strain rate control based on load or displacement 2.16 Supporting the curves of Hit hardness and Eit modulus as a function of depth 2.17 Support Hertz analysis of indentation loading curve and automatically calculate Hertz modulus 2.18 Support creep and relaxation measurement, including indentation Cit, creep and Rit indentation relaxation, and automatically calculate Cit 2.19 Support dynamic loading mode, can apply sinusoidal harmonics of force, frequency: 1-200Hz, automatically obtain the curve of hardness and modulus ver

Introduction of instruments：